ここの内容はすべて全く無保証です。特に、理学電機は一切関知していません。 納得できる内容だけ信じてください。
RS232Cのコマンドを独自に解釈した結果です。
| direction PC-IP | command or reply | 意味(推定を含む) | 数字の変化(推測)と作業内容 右端はdevice check時の流れ | |
| ---> | RS | system reset | starting device check | 1 |
| <--- | C RS | (reply) | 2 | |
| ---> | IT3/3500/300000/1500/0/0/0 | reset and device check | 3 | |
| <--- | C IT3 | 4 | ||
| ---> | IT1/100000/150000/200/0/0/0 | 5 | ||
| <--- | C IT1 | 6 | ||
| ---> | IP1(1)/4/3/1 | set parameters for IP | (1)1:50mm/2:100mm | |
| <--- | C IP | (reply) | ||
| ---> | IR800(1)/7200/3800(2)/1/32(3)/1 | set parameters for data | (1)"z方向pixel"+500,(2)"x方向pixel",(3)? | |
| <--- | C IR | (reply) | ||
| ---> | DM3/0/3500/2 | x-axis (rotate) datum | 7 | |
| <--- | C DM3 | (reply) | 8 | |
| ---> | DM1/0/0/6 | z-axis (drum axis) datum | 9 | |
| <--- | C DM1 | (reply) | 10 | |
| ---> | HV1/2180 | high voltage up | 11 | |
| <--- | C HV | (reply) | 12 | |
| ---> | IT3/100/300000/20000/0/0/0 | |||
| <--- | C IT3 | |||
| ---> | FP3/0/1/1 | start rotation | drum rotation | |
| <--- | C FP3 | (reply) | ||
| ---> | CC | check speed(?) | ||
| <--- | T 51 | (reply) / not ready | ||
| ---> | CC | check speed(?) | ||
| <--- | T 0 | (reply) / ready | ||
| ---> | PS1/0/100000/0(1) | z-axis (drum axis) positioning | (1)"start line"x10 | |
| <--- | C PS1 | (reply) | ||
| ---> | DT3/0/3 | laser shutter open | start reading | |
| <--- | C DT3 | (reply) | ||
| ---> | RI1/0/6000(1)/3010(2) | set parameters for reading line | (1)50mm:6000/100mm:12000, (2)"read line+1"x10,100mmではx20 | |
| <--- | C RI1 | (reply) | ||
| ---> | FP3/0/1/0 | stop rotation | drum stop | |
| <--- | C FP3 | (reply) | ||
| ---> | SP | |||
| <--- | S SP | |||
| ---> | DT3/0/4 | laser shutter close | ||
| <--- | C DT3 | (reply) | ||
| ---> | DM3/0/3500/2 | x-axis (rotate) datum | datum | |
| <--- | C DM3 | (reply) | ||
| ---> | DM1/0/0/6 | z-axis (drum axis) datum | ||
| <--- | C DM1 | (reply) | ||
| ---> | HV1/0 | high voltage down | ||
| <--- | E 200 | (reply) | ||
| ---> | DM3/0/3500/2 | x-axis (rotate) datum | ||
| <--- | C DM3 | (reply) | ||
| ---> | FR1/1/1/1 | erase lamp on | erase | |
| <--- | C FR1 | (reply) | ||
| ---> | PS3/0/0/200 | x-axis (rotate) positioning | ||
| <--- | C PS3 | (reply) | ||
| ---> | PS3/0/0/335 | x-axis (rotate) positioning | ||
| <--- | C PS3 | (reply) | ||
| ---> | FR1/0/0/0 | erase lamp off | ||
| <--- | C FR1 | (reply) | ||
| ---> | DM3/0/3500/2 | x-axis (rotate) datum | datum | |
| <--- | C DM3 | (reply) |
つるたにの自己紹介へ戻るつるたにのホームページへ戻る